Residential & Domestic Kitchen Fire Suppression

Kitchensafe The Only Residential & Domestic Kitchen Fire Suppression System In Europe Third Party Approved to a recognised standard UL300A

 

Kitchensafe Fire Suppression System

Fire Safety For Residential & Domestic Homes

The Flamefast Kitchensafe fire suppression system has been developed to meet the requirements for domestic & residential kitchens and is Third party tested and approved to UL300A. The system is the ideal solution to protect cook top areas for assisted living, student accommodation and domestic properties where the cook top is a major risk for either occupants or insurance companies.

The Flamefast Kitchensafe fire suppression system is quick and easy to install and compatible with all two, four and six burner ranges. It can be installed next to the appliance or inside a kitchen cupboard out of sight.

This unique system consists of an easy to clean stainless steel wall mounted cabinet which houses the agent tank and electronics. The system is supplied with a manifold which houses the nozzle(s), and stainless steel hoses which connect to the cabinet.

Floorplan of where the KitchenSafe fire suppression system is required

In residential accommodation it is common in open plan appartments, where the kitchen facilities are within 1.8M of the final exit door that fire suppression systems are installed to the cooker top to aid with exit strategy, similar to example below.

Automatic Fire Detection System

Kitchensafe operates automatically in the event of fire which removes the need or risk of a person attempting to fight the fire with conventional extinguishers or fire blankets. The system has a typical fire knock down time within 5 seconds of discharge, allowing the remaining discharge time to cool and render the affected area completely safe.

Following system activation the cooking area is easily cleaned down in minutes and ready for use, unlike conventional extinguisher types such as dry powder etc.

Remote Gas Detectors

The Kitchensafe system has a dedicated interface for remote gas detectors and can also be connected into a BMS or Fire Alarm system. If a fire occurs in a remote location such as student accommodation, an alarm can be raised in the central control area. Finally, a dedicated fuel supply shut off will automatically cut off gas and electric supplies if the system is discharged.

The system requires a 240v AC, 3 amp power supply.

For more information please see our video and datasheet

There are no products matching the selection.